Amber turn signals
that actually work.
No glitches.
On US-spec Teslas, the amber turn signal in EU tail lights comes on together with the brake light. The adapter separates the signals: braking — red only, turning — amber only.
How it works
Brake pedal pressed
US Tesla wiring ≠
European tail lights
US-spec Model 3 and Y ('17–'20) ship with red rear turn signals and combined brake/turn wiring. Install European or aftermarket tail lights with amber turn signals — and the car's firmware doesn't know how to drive them properly.
Turn signal + brake light fire together
Press the brake and both signals come on at once. The car treats the amber section as part of the brake light and lights it red along with the rest.
Fails homologation & inspection
For ECE/EU homologation, MOT, TÜV or any local roadworthiness inspection, a turn signal that also flashes the brake is an immediate fail. The adapter makes the car legal again.
One connector — all problems solved
The adapter sits between the factory car connector and the tail light. Inside is a microcontroller that translates the US-spec signals into the format expected by EU and aftermarket lights.
-
Separates brake and turn signal
Each signal on its own wire. Brake → brake only. Turn → amber only. No more dual flashing.
-
Installs without cutting wires
Plug-and-play: sits between the factory connector and the tail light. Stock wiring stays 100% untouched — fully reversible.
-
Works with EU OEM & aftermarket lights
Works with both pre-facelift and facelift tail lights — European OEM and popular aftermarket sets.
-
Passes ECE / MOT / TÜV inspection
With the adapter, turn signals operate independently from the brake light — your car will pass any standard roadworthiness inspection.
-
Survives Tesla OTA updates
Operates at the hardware/wire level — Tesla over-the-air firmware updates have zero effect on it. Set once, forget forever.
Three steps. Five minutes. No tools.
No lift, no diagnostic scanner, no soldering. Any DIY-capable driver can do it, or hand it to your local Tesla shop for a quick install.
Pull back the trunk trim
Pop off the side trim panel in the trunk near the tail light — the factory connector is right there. No need to remove the lamp itself.
Plug the adapter in between
Disconnect the factory connector from the tail light. One end of the adapter clicks into the car connector, the other into the lamp. Audible click confirms a solid fit.
Refit the trim panel
Snap the trim panel back in place. Done. Test: turn signal and brake light now work independently.
Does it fit your Tesla?
The adapter is designed for US-spec Tesla Model 3 and Model Y from 2017–2020 with either factory or replacement tail lights.
Not sure? Send us your VIN or year/trim — we'll confirm fit in a minute
Tested solution with full support
In stock and ready to ship — no waiting on suppliers. Fixed kit price in USD, shipping quoted upfront. Three-year warranty and live English-language support over Telegram or WhatsApp.
Fixed USD pricing
The kit price is fixed in USD — no surprise currency conversions. Shipping is calculated separately for your country and quoted before payment.
In stock, not pre-order
Same-day shipping with international carriers and delivery services. Tracking number sent immediately after dispatch.
Install support
We're online in Telegram/WhatsApp. Step-by-step video guide included. Any questions — just message us.
14-day returns
Doesn't fit? Full refund, no questions asked. Plus a 36-month manufacturer warranty against defects.
Everything customers ask before buying
Which tail lights should I buy?
Can I install it myself or do I need a shop?
Does it work with aftermarket lights?
Will Tesla OTA updates break the setup?
What's in the box?
How does shipping and payment work?
What if it doesn't fit or breaks?
Three steps to shipping
You pay only after we confirm compatibility and quote the shipping cost.
Send a request
The form below or a message in any messenger. Model, year and country are enough.
We confirm and quote
We check compatibility by model or VIN, calculate shipping and send payment details.
Payment and shipping
We ship the day you pay and send the tracking number. Instructions come in the messenger.
Tell us
about your Tesla —
we'll confirm fit.
Message us on any platform or fill out the form. We'll verify compatibility, calculate shipping to your country, and send payment details.
Request received
Got it 👍 We'll reach out via Telegram, WhatsApp or phone shortly.
Shipping & payment
🚚 Worldwide shipping
We ship internationally with full tracking.
We work with international carriers and delivery services, and pick the option that is most cost-effective and fastest for your country.
Delivery time
- Europe: 5–10 business days
- USA / Canada: 7–14 business days
- Australia / Asia: 10–18 business days
Cost
Shipping cost depends on your country and carrier. We calculate it individually after confirming the order — typically $25–$45 USD for most destinations.
Payment
International bank transfer (SWIFT/Wise). We send the invoice and payment details once your order is confirmed.
Returns & warranty
14-day return for any reason. 36-month warranty against manufacturer defects. Return shipping is paid by the buyer; warranty defects are covered by us.
Got questions? Use the order form or message us — we'll get back to you within hours.